Problems with RMS and Red5 server, RMS address

Hello everyone

I have a dedicated server with CENTOS 6.6 / WHM / cPanel and Dolphin 7.1.5.

I have the Red5 server and additionally the RMS from Boonex installed.
The RMS I have installed according to the following instructions: http://www.boonex.com/trac/dolphin/wiki/RayMediaServerInstallation

Now I get when calling the RMS server under "my IP: 5080" the Home of the Red5 server.
Is that right?

In addition, I can not in Dolphin admin under modules / Flash / RAY Base Settings / RMS IP address or domain name: 5080, to enter. Entries are limited to 15 characters there. My IP RMS is but longer ...

What am I doing wrong?

Thanks for the help

Best regards

Markus

 
 
 
 
 
Quote · 7 Feb 2015

Did you add your domain name to the file?

Quote · 7 Feb 2015

hello


Thanks for the answer.

Yes I did install exactly point by point, as described in the instructions.
My problem is the RAY Base settings into the flash modules.
I kan not enter my IP with the 5080 because my IP is longer than the input field. There, only 15 characters are allowed.

What do I do?
Alone with the command: 5080 can not connect to the RMS are produced.

What did I do wrong?

Quote · 7 Feb 2015

The 15 char limit is becuse a IP address can only be 15 characters long. You do not specify the IP address and port on the same line.

Examples

1.1.1.1            (Right)
1.1.1.1:5080   (Wrong)

See screen shot below. Ports are specified in different boxes.




Make sure the RMS server actually started. If it's not connecting, then make sure ports are allowed by firewall and they are not in use by something else on your server such as your RED5 server.

https://www.deanbassett.com
Quote · 7 Feb 2015
 
 
Below is the legacy version of the Boonex site, maintained for Dolphin.Pro 7.x support.
The new Dolphin solution is powered by UNA Community Management System.